How many acres can you clear in a day?
Pick your trade and your site. Get a realistic acres-per-day range, then turn it into a bid that actually covers your costs.
Typical for a job like this
1 to 1.5
acres per day
A typical range for forestry mulching on medium growth, flat ground, easy access. Your real output depends on your machine, your operator, and the day.
Run your break evenTypical acres per day
A starting point on flat ground with easy access. Slopes and tight access pull every number down. These are typical ranges, not a promise. Run your own numbers.
| Density | Forestry Mulching | Land Clearing |
|---|---|---|
| Light | 1.3 to 1.9 ac/day | 0.6 to 0.9 ac/day |
| Medium | 1 to 1.5 ac/day | 0.5 to 0.7 ac/day |
| Heavy | 0.7 to 1 ac/day | 0.3 to 0.5 ac/day |
| Extreme | 0.5 to 0.8 ac/day | 0.2 to 0.4 ac/day |
What changes the number
Vegetation density
The single biggest lever. Light brush moves fast. Heavy stems and extreme overgrowth can cut your acres per day in half or more.
Terrain
Flat ground is your baseline. Moderate slopes slow you down and burn more fuel. Steep ground is slower still and needs a walk before you bid.
Site access
Easy access means you are working, not repositioning. Tight or difficult access eats hours in moving the machine and the trailer.
Want the numbers dialed in for your machine?
Get an acres-per-day and bid worksheet tuned to your setup, plus early operator pricing. Drop your email.
Now turn it into a bid
Acres per day is only half the picture. See whether your price actually covers your costs, and learn what a fair bid looks like.
How many acres per day can a forestry mulcher clear?
On flat, easy-access ground it ranges by vegetation. Light brush runs faster, medium density lands around a bit over an acre a day, and heavy or extreme overgrowth drops well under an acre. Slopes and tight access slow all of it down. The estimator on this page gives a range for your exact conditions.
How many acres per day for land clearing?
Land clearing is slower than mulching because you are moving material, not just mulching it in place. Expect a fraction of an acre to around three quarters of an acre a day depending on density, terrain, and access. Heavy, steep, tight jobs are the low end.
What slows down your acres per day the most?
Vegetation density first, then terrain, then access. Each one compounds: a heavy, steep, difficult site is dramatically slower than the same acreage on light, flat, easy ground. That is why a flat per-acre price loses money on the hard jobs.
How do I turn acres per day into a bid?
Divide the job's acreage by your acres per day to get crew days, then multiply by your crew day rate. That is your cost floor. Charge below it and you lose money. The break-even calculator does this math for you.